Input/Output - ABB ControlMaster CM15 User Manual

ControlMaster CM15 and CMF160
Universal process indicator

7.3 Input/Output

Enables analog and digital inputs / outputs and relays to be configured.
Menu
Input/Output
Analog Inputs
Analog Input 1 (2 – CM15)*
Analog Input 1 (4 – CMF160)*
Input Type
Digital Volt Free
Freq. Input
Pulse Input
*Analog Input 2 and 4:
Freq Input, Pulse Input
input is set to
Thermocouple
44
1
/ DIN
8
Input types comprise: Millivolts, Milliamps, Volts, Resistance (Ohms), RTD,
Thermocouple,
Digital volt-free, 24V Digital, Freq. Input, Pulse Input.
Additional Input Type comments:
Acts as a digital input.
Sets the maximum frequency and equivalent flow rate in the engineering range 0 to 6
KHz. (A frequency of 0.01 to 6 KHz can be used to create an analog value.)
This parameter counts pulses and is recommended only for use with electromagnetic
flowmeters.
and
Resistance
.
not available. A
Thermocouple
7 Advanced Level
input type can be set only if the first
IM/CM/I–EN Rev. P