Safety; Electrical Safety; Symbols - ABB ControlMaster CM15 User Manual

ControlMaster CM15 and CMF160
Universal process indicator

1 Safety

Information in this manual is intended only to assist our customers in the efficient operation of our equipment.
Use of this manual for any other purpose is specifically prohibited and its contents are not to be reproduced in full
or part without prior approval of the Technical Publications Department.

1.1 Electrical Safety

This equipment complies with the requirements of CEI / IEC 61010-1:2010 3
Equipment for Measurement, Control and Laboratory Use' and complies with US NEC 500, NIST and OSHA.
If the equipment is used in a manner NOT specified by the Company, the protection provided by the equipment may
be impaired.

1.2 Symbols

One or more of the following symbols may appear on the equipment labelling:
Warning – Refer to the manual for instructions
Caution – Risk of electric shock
Functional earth (ground) terminal
Protective earth (ground) terminal
IM/CM/I–EN Rev. P
1
/ DIN
8
rd
edition 'Safety Requirements for Electrical
Direct current supply only
Alternating current supply only
Both direct and alternating current supply
The equipment is protected through double insulation
1 Safety
3