Appendix A - Digital And Analog Sources; Digital Sources - ABB ControlMaster CM15 User Manual

ControlMaster CM15 and CMF160
Universal process indicator
Appendix A – Digital and Analog Sources
Note. Numbers in brackets indicate additional parameters, for example, 'Alarm 1 (8) Ack. State indicates that 8 Alarm Ack.
State parameters are available.
A.1 Digital Sources
Source Name
Alarm 1 (8) Ack. State
Alarm 1 (8) State
Anlg IP 1 (2) Fail (CM15)
Anlg IP 1 (4) Fail (CMF160)
AO1 (2) Loop Break
Delay Timer 1 (2)
IP 1 (2) Digital State (CM15)
IP 1 (4) Digital State (CMF160)
Linearizer 1 (2) Fail
94
1
/ DIN
8
Description [Comment]
Acknowledged alarm = 0
Unacknowledged alarm = 1
Alarm state
Analog input failure (active when the
signal detected at the analog input is
outside the fault detect level specified
during configuration).
Analog output
Delay timer state
Input 1 (2) digital state
Custom linearizer failure
Appendix A – Digital and Analog Sources
Source Name
Logic Equation 1 (8)
Math Block 1 (8) Fail
RTA 1 (2) State
Softkey Toggle
Softkey Edge
T1 (2) Int Pulse
Description [Comment]
Logic equation result
Maths failure
Real time alarm state
Front panel soft key toggles the
source's state.
Front panel soft key sets the source
active on key press.
Totalizer intermediate pulse. Active for
1 second when the intermediate
count is reached.
IM/CM/I–EN Rev. P