ABB ControlMaster CM15 User Manual page 50

ControlMaster CM15 and CMF160
Universal process indicator
...Input/Output
Analog Outputs
Analog Output 1 (4)
Output Type
Source
Elect. Low*
Elect. High*
*Not applicable if
Output Type
48
1
/ DIN
8
The analog outputs can be configured to retransmit any analog value and have a
configurable range from 0 to 24 mA.
Output 1 can also be configured to function as a digital output.
Note. CM15: Analog Output 2 is available only if Option Board 1 is fitted –
see page 21.
CMF160: Analog Outputs 3 and 4 available only if optional Output / Slope
Relays Board is fitted (CM40/0235) – see page 22.
Selects the analog or digital output (applicable only to Analog Output 1).
Selects the parameter to be assigned to the output – see Appendix A.2, page 95 for
description of sources.
The current output required when the source value is equal to the Eng Low value –
see page 46.
The current output required when the source value is equal to the Eng High value –
see page 46.
is or is .
Digital Source None
7 Advanced Level
IM/CM/I–EN Rev. P