ABB Endura AZ series User Manual page 33

Endura AZ series integral and remote transmitter
Combustion oxygen monitor
Access Level
Logout
Read Only
Standard
Advanced
Service
Back
Enter Password
******
R S T U V W X Y Z = 1 2 3 4 5 6 7
Next
Table 5.4 Access Level and Enter Password Screens
IM/AZ20E–EN Rev. F
Access Level
The Access Level is used to access menus at Read Only , Standard,
Advanced and Service levels.
The Access Level screen is displayed by pressing
Select
Page (1 or 2).
To enter a password-protected level (Standard or Advanced), scroll to
the required level, and press
Enter Password below.
To enter at Read Only level, press
Enter Password screen is bypassed and the (Read Only) Calibrate
menu is displayed – see Section 5.4.2, page 36.
Note. The Logout option is displayed when returning to Access Level
from password-protected levels.
Enter Password
At the Enter Password screen, use the
to individual password character(s).
Press to select a password character.
OK
When all password characters have been selected, press
If the password is correct, the requested level is accessed.
If the password is incorrect the last viewed Operator Page is displayed
with the Locked (
Note. A default time-out period (within 5-minutes of exit) enables a user
to return to the Operator level and then re-enter the configuration menus
without re-entering the password. The configuration menu displayed at
exit is also remembered.
For periods in excess of 5 minutes, the password must be re-entered to
access the password-protected menus.
. Enter the password as described in
at the Access Level screen. The
) icon in the status bar.
5 Programming
from Operator
and keys to navigate
.
31