4.9 Initialization to Factory Shipment Setting
Factory shipment settings other than the calibration and sensor head re-
placement mode can be restored.
Reference
For the initial setting items, refer to section "2.4 List of Factory Shipment
Settings" on page 43.
Setting example
<Setting 1 mode>
・Initialization takes about four seconds.
・Power must be turned off then on again with 1.06 or earlier software
versions.
・To initialize the calibration and sensor head replacement modes, restore
the default sensor head replacement mode.
POINT
For details, refer to section "5.4 Sensor Head Replacement Setting" on
page 108.
94
Press
to select "InIt".
Press
to initialize, then the
detection state is indicated.