Output Delay - Panasonic GP-X Series User Manual

4.3.3 Output Delay

Select the off-delay timer setting from the options shown in the table below.
Indication in lower line
Off-delay timer
The timing for switching the judgment output from ON to OFF retreats with
the timer setting.
The timing chart is shown below.
[Timer type and change in GO output (in the case of "to" timer setting)]
Regular output
(without timer)
Off-delay timer
・The delay becomes longer with the interference prevention setting.
Actually operate to check. For details, refer to Section "4.7 Interference
prevention Setting" on page 90.
・If the number of connected units is as large as eight, the delay is 12.8
POINT
times (19.2 times with GP-X22KL) that of a single unit.
74
Delay
No delay No delay
100ms 100ms off-delay
200ms 200ms off-delay
400ms 400ms off-delay
800ms 800ms off-delay
1,000ms 1,000ms off-delay
Judgment output is held until the reset
Hold
signal is issued.
ON
OFF
ON
OFF
Description of action
t
o