Bcd Output Unit (Optional) - Panasonic GP-X Series User Manual

1.3.2 BCD Output Unit (Optional)

No. Description
Cable with
connector on
one end for
1
BCD output unit
(Optional)
Connector for
2
BCD output
Connector for
3
connecting the
controller
Notes: 1) To use the BCD output unit, make sure to configure the BCD out-
put.
For the setting method, refer to section "5.2.2 BCD Output Se-
Reference
lection Procedure" on page 102.
2) After the controller is configured for BCD output, the analog volt-
age output becomes invalid.
For compliance with CE, mount a ferrite clamp for EMC measures on
the cable and within 10mm of the root of the cable connector to reduce
the effects of radio noise.
[Recommended product: ZCAT2035-0930A made by TDK Co., Ltd.]
1
Connect the BCD output unit.
Connect the cable with connector on one end for
BCD output unit
Connect with the side panel of the controller.
3
2
Function
11