Display Setting; Selection Of Data Displayed In Upper And Lower Lines; Lower Lines - Panasonic GP-X Series User Manual

4.6 Display Setting

4.6.1 Selection of Data Displayed in Upper and Lower Lines

The items displayed on the panel in the detection state can be designated.
In the factory shipment state, the "HI/LO detected value" is displayed on the
upper line (orange) and the "GO detected value" on the lower line (green).
Setting example
<Setting 1 mode>
<Upper line setting>
<Lower line setting>
Note: With this function, calculation can be made
with the optional controller communication
unit.
If calculation is not made, a random value is
displayed.
Define the upper and lower lines through a series of operations.
If the default setting is selected on the upper line, the default setting is
Notice
restored for the lower line, too.
86
Upper line (Orange)
Lower line (Green)
Press to select "dISP".
Default
In the case of voltage
Distance detection
output display: "voLt"
Various hold values
Press
Calculated value (Note)
select the item.
Upper limit value
Lower limit value
Press
Lower line display item
(name)
Default
In the case of voltage
Distance detection
output display: "voLt"
Various hold values
Press
Calculated value (Note)
select the item.
Upper limit value
Lower limit value
Press
Upper line display item
(name)
or to
to set.
or to
to set.