Selecting The Display Unit - Panasonic GP-X Series User Manual

4.6.2 Selecting the Display Unit

Distance display (mm) or output voltage display (volt) can be selected.
With the distance display (mm), a value after display scaling is displayed.
With the voltage output (volt), a voltage output is displayed so that the dis-
play scale agrees with the analog voltage output value.
Setting method
If voltage output display is selected, the display scale cannot be changed.
Change the analog voltage output scale.
To return the analog voltage output and display to separate settings, select
"mm". After the procedure, the factory shipment display scale is restored.
Define the display scale again.
POINT
For details of display scale, refer to section "4.4 Display Scale" on page 76.
Press to select "unit".
Press or to switch between "mm" and "volt".
87