Kenwood TK-5810 Service Manual page 23

■ Align the cable connecting the W2 terminal:
TK-5810H(BG) only
When you assemble the fi nal unit, align the cable con-
necting the W1 terminal as shown in fi gure, then insert it
into the connector (CN1) of the control unit.
Accessory
W1 terminal
cable
cable
W1
CN1
Control
unit
■ Procedures after installing the case packing to
the chassis
After installing the case packing to the chassis, confi rm
that all corners of the upper/lower packing are securely
fi tted to the chassis. Place are shown in the arrow in the
fi gure below.
• Case packing (Upper)
TK-5810
DISASSEMBLY FOR REPAIR
Final unit
W1 terminal
cable
TK-5810H
TK-5810
• Case packing (Lower)
TK-5810
■ Sequence of tightening the screws for the up-
per/lower case to the chassis
Install the upper/lower case to the chassis and tighten
the screws in the order shown in the fi gure below.
• Case case
TK-5810
5
3 4
1 2
•Lower case
TK-5810
3 4
1 2
BG /5810H BG
( ) (
TK-5810H
TK-5810H
5 6
3 4
1 2
TK-5810H
5 6
3 4
1 2
)
23