Realignment - Kenwood TK-5810 Service Manual
Uhf p25 transceiver
Hide thumbs
Also See for TK-5810:
- Instruction manual (44 pages) ,
- Specifications (2 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
1. Modes
User mode
Panel test mode
PC mode
Firmware
programming mode
Firmware version information
Clock adjustment mode
Transceiver information mode
Clone mode
Self programming mode
Mode
User mode
For normal use.
Used by the dealer to check the fundamen-
Panel test mode
tal characteristics.
Panel tuning mode
Used by the dealer to tune the transceiver.
Used for communication between the
PC mode
transceiver and PC.
Data programming
Used to read and write frequency data and
mode
other features to and from the transceiver.
Used to check the transceiver using the
PC test mode
PC. This feature is included in the FPU.
See panel tuning.
Firmware
Used when changing the main program of
programming mode
the fl ash memory.
Firmware version
Used to confi rm the internal fi rmware ver-
information
sion.
Clock adjustment
Used by the dealer to adjust date and time.
mode
Transceiver
Used to confi rm the transceiver fi rmware
information mode
version.
Used to transfer programming data from
Clone mode
one transceiver to another.
Self programming
Frequency, signaling and features write to
mode
the transceiver.
REALIGNMENT
Panel tuning mode
Data programming mode
PC tuning mode
PC test mode
Function
TK-5810
2. How to Enter Each Mode
Mode
User mode
Panel test mode
PC mode
Panel tuning mode
Firmware programming mode
Firmware version information
Clock adjustment mode
Transceiver information mode
Clone mode
Self programming mode
3. Panel Test Mode
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
5. PC Mode
5-1. Preface
The transceiver is programmed by using a personal com-
puter, programming interface (KPG-43/43A), USB adapter
(KCT-53U) and programming software (KPG-95DG: ver. 6.10
or later).
The programming software can be used with a PC. Fig-
ure 1 shows the setup of a PC for programming.
PC
KPG-95DG
(Ver. 6.10 or later)
PC
PC
D-SUB
D-SUB
(25-pin)
(9-pin)
KPG-43
Transceiver
Transceiver
Fig. 1
BG
/5810H
BG
(
)
(
Operation
Power ON
[PF1] + Power ON
Received commands from PC
[Panel test mode] + [GRP
]
[PF2] + Power ON
[PF3] + Power ON
[PF4] + Power ON
[PF1] + [PF3] + Power ON
[PF5] + Power ON
[GRP
] + Power ON
KPG-43 or KPG-43A or
KPG-43A + KCT-53U
Illustration is KPG-43.
PC
USB
KCT-53U
KPG-43A
KPG-43A
Transceiver
)
5
Hide quick links:
Advertisement
Table of Contents
