Description Of Each Connector; Oem Ac Output; P41 Monitor Ac Output; J51 Ac Output For The Ac/Dc Tray - Toshiba Aplio SSA-770A Service Manual

No. 2D730-148E*O
(3) Description of each connector
(a) OEM AC output
Output voltage: Total of the three connectors 250 V (when 100 VAC is input)
360 V (when 120 to 230 VAC is input)
NOTE: When the power supply of the system is turned ON, the relay in the
transformer tray is turned ON by the relay control signal coming from the
AC/DC tray and the AC output is also set to ON.
(b) P41 monitor AC output
PIN No. Signal
1 180 VAC to 220 VAC
2 1 180 VAC to 220 VAC
3 1 Protective grounding (GND)
41 -
(c) J51 AC output for the AC/DC tray
cln the case of the transformer tray> cln the case of the Trans-unit>
PIN No.
Signal
1 180 VAC to 220 VAC
2 1 180 VAC to 220 VAC
3
I
-
4 1 Protective grounding (GND)
PIN No. Signal
1 78 VAC to 121 VAC
2 78 VAC to 121 VAC
3 78 VAC to 121 VAC
4 78 VAC to 121 VAC
5 Protective grounding (GND)
6 Protective grounding (GND)
6-5