Table of Contents
Advertisement
No. 2D730-148E*O
3.14
Removing the PSA and PSD
(1)
c-3
(3)
(4)
Removing the left side cover and AC-DC unit
Refer to subsection 3.13.
Removing the FAN-BOX
(a)
Remove the cable of the FAN-BOX (P95).
(b)
Loosen the three M3 FAN-BOX mounting screws CA> that secure the PSA and PSD to
remove the FAN-BOX.
Removing the PSA
Loosen the three screws <B> and two screws CC> that secure the PWB rack, hold the
handles at the upper and lower ends, and extract the PSA.
Removing the PSD
Loosen the two screws CD> and the screw cE> that secure the PWB rack, hold the handles
at the upper and lower ends, and extract the PSD.
Screw cB>
Sc;kw cA>
Screw <E>
(SBPP3-IOSCR)
3-48
Advertisement
Table of Contents
