No. 2D730-148E*O
(5)
Removing the near/away slide wire (at the support unit side)
(a)
Remove the two screws CA> (M4) and lift the bellows.
(b)
Remove the screw cB> (M3) and remove the clamp.
(c)
Loosen the screw CC> and rotate the wire retaining bracket to remove the tip of
the wire.
(d)
Loosen the nut and rotate the adjuster to remove the wire from the support unit.
Screw cB>
(SBPP3-IOSC
\S
crew <A>
(SBPP4-12SCR)
-
Support unit
Adjuster
Nut
re
\
Wire retaining bracket
3-75