Table of Contents
Advertisement
No. 2D730-148E*O
3.8
Removing the PWBs
(1)
Removing the right side cover
(a)
Remove the two rubber caps at the bottom of the cover.
(b)
Remove the two M4 screws <A> to remove the cover.
* The cover can be removed by pulling its bottom toward you.
(2)
Removing the PWBs
(a)
Loosen the four screws cB> to remove the PWB rack shield plate.
(b)
Release the card ejectors at the upper and lower ends of the PWB and extract the PWB.
PWB rack
(SBPPC12SCR)
cover
Advertisement
Table of Contents
