47-04-04: Fax Detection; 47-04 Program Entry - NEC Aspire S IntraMail System Manual

- Entering 0 causes the Automated Attendant to immediately route callers to the Timeout destination
programmed in the active Dial Action Table.
Default
✔ 5 seconds

47-04-04: Fax Detection

(Fax Detection)
Use this option to enable or disable Fax Detection for the Call Routing Mailbox. In enabled, the IntraMail
Automated Attendant (when using this Call Routing Mailbox) will detect incoming fax CNG tone. The fax
call will then route to the company fax machine according to the setting of 47-01-06: Fax Extension on
page 195. If disabled, the Automated Attendant will not detect incoming fax calls.
See Fax Detection on page 80 for more.
■
See Master Mailbox on page 117 for more.
■
See Voice Mail Overflow on page 177 for more.
■
Options
1 (Yes - enabled)
■
0 (No - disabled)
■
Default
✔ 0 (No - disabled)

47-04 Program Entry

CALL1 + #*#* + Password (12345678) +
This selects the option chosen for Master Call Routing Mailbox 1.
■
There are 16 available Master Mailboxes (1-16).
01
02
03
04
Press this:
Editing
HOLD
-1 +1
← ← ← ← → → → →
CONF
CLEAR
Line Keys (LK)
Navigation
FLASH
MSG or back
select
IntraMail for Aspire System Guide
47-04: Master Call Routing Mailbox Options
47-04: Master Call Routing Mailbox Options
(Entry Range) [Default Setting]
HOLD +
Dial Action Table (1-16) [1]
Scrn Trf Timeout (0-255) [15]
Dialing Timeout (0-99) [5]
Fax Detection (1=Yes - enabled, 0=No - disabled) [0]
LK1-No, LK2=Yes
Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
Scroll backwards ( ) or forwards (
-1
When editing an entry, moves the cursor left or right.
When editing an entry, delete the character to the left of the cursor.
When editing an entry,
CLEAR
Where indicated, press a line key to enter a specific value for the selected option.
+ Mailbox number +
FLASH
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
Scroll consecutively backwards or forwards through selected Option or Series.
Selects currently displayed Option or Series
Program 47: IntraMail
4704 + Option.
To do this:
) through the list of available entries.
+1
erases the entire entry from the display.
selects a new mailbox number
FLASH
Chapter 3: Programming ◆ 209
3