Connection And Startup - Siemens HiPath 3000 Series Service Documentation

wclient.fm
Workpoint Clients
optiPoint 410 / optiPoint 410 S and optiPoint 420 / optiPoint 420 S
10.2.3

Connection and Startup

optiPoint 410, optiPoint 420
HiPath 3000 together with HiPath Xpressions Compact supports the central administration of
the IP terminals connected to the system. For this purpose a Deployment Tool (DLS Interface
DLI) has been implemented on the HiPath Xpressions Compact boards. The DHCP and FTP
servers integrated in DLI support the following:
the central configuration of parameters for all IP terminals connected enabling plug&play
●
operation
the central software update of all IP terminals connected
●
For information about the prerequisites for using the DLI function, see Section 10.3.
The DLI function can only be used for standalone systems.
>
The Deployment and Licensing service is available for networked HiPath 3000 sys-
tems with or without HiPath 5000 RSM. The Deployment and Licensing service can
also be used for systems that do not satisfy the prerequisites for using the DLI func-
tion. For information on how to use this tool, see the Deployment Service Adminis-
trator Manual.
For information on terminal administration, refer to the optiPoint 410/420 Administrator Manual.
optiPoint 410 S, optiPoint 420 S
For information on how to connect and start up terminals, refer to the optiPoint 410 S/420 S
Administrator Manual:
The software can be upgraded over:
the Deployment and Licensing service
●
Information on the procedure can be found in the Deployment Service Administration Man-
ual.
the WBM access at the relevant optiPoint IP telephone.
●
The optiPoint 410 S/420 S Administrator Manual contains information on this procedure.
10-68
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation