Siemens HiPath 3000 Series Service Documentation page 488

boards.fm
Boards for HiPath 3000
Options
Table 3-173 ALUM4 - Interface Assignments (not for U.S.)
Contact
13
14
15
16
* = or to free analog port
Table 3-174 ALUM4 - Interface Assignments (for U.S. only)
Pin X3
(to MDF)
1 R from trunk
1
2 T from trunk
1
3 R from trunk
2
4 T from trunk
2
5 R from trunk
3
6 T from trunk
3
7 R from trunk
4
8 T from trunk
4
Note: Pinouts shown are at the board itself. The supplied main distribution frame cable (MDF
cable) reverses the signal order for X3 and X4 before the MDF.
1 To the analog station ports on the CBCC (recommended) or to four consecutive ports on an 8SLA board.
3-356
Connector X3
–
–
–
–
X4
(to MDF)
Pin
R to station 1 1
T to station 1 2
R to station 2 3
T to station 2 4
R to station 3 5
T to station 3 6
R to station 4 7
T to station 4 8
Connector X4
–
–
–
–
Y-Cable from X6 to
TMGL4
Assignment
T to TMGL4 port 1
R to TMGL4 port 1
T to TMGL4 port 2
R to TMGL4 port 2
T to TMGL4 port 3
R to TMGL4 port 3
T to TMGL4 port 4
R to TMGL4 port 4
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Connector X6
TA2 to SLA* a
TB2 to SLA* b
TA1 to SLA* a
TB1 to SLA* b
Y-Cable from X6 to Ana-
log Ports
Pin Assignment
9 T to analog port 4
10 R to analog port 4
11 T to analog port 3
12 R to analog port 3
13 T to analog port 2
14 R to analog port 2
15 T to analog port 1
16 R to analog port 1
A31003-H3590-S100-7-7620, 06/2012
1