Dbsap - Siemens HiPath 3000 Series Service Documentation

boards.fm
Boards for HiPath 3000
Central Board
3.2.8

DBSAP

A prerequisite for expanding HiPath 3800 to a two-cabinet system is that the DBSAP (Driver
Board for Synergy Access Platform) board is mounted on the backplane of the expansion cab-
inet.
DBSAP ensures that the expansion cabinet receives HDLC, PCM and clock signals from the
basic cabinet. In addition, an ID signal is created which indicates the availability of an expan-
sion cabinet to the CBSAP.
With 68-pin DB68 mini-jack for connect-
ing the connection cable to the basic cab-
Figure 3-13 DBSAP (S30807-Q6722-X)
The cable (C39195-Z7611-A10) is used as the connection cable between basic cab-
>
inet (X201 jack) and expansion cabinet (DBSAP board). To ensure smooth opera-
tion, use only shielded cables with a maximum length of 1 m.
3-48
Front
inet
Nur für den internen Gebrauch
Back
With four jacks for plugging into the
backplane of the expansion cabinet
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation