Siemens HiPath 3000 Series Service Documentation page 170

boards.fm
Boards for HiPath 3000
Central Board
Front panel
Figure 3-6 CBSAP - Front Panel
3-38
Two LEDs indicating the board status:
Run (green, flashing: 0.5 s on/0.5 s off) = correct, error-free op-
●
eration
Fail (red) = error encountered
●
Reset/reload switch
Slide-in shelf for MMC
V.24 interfaces (9-pin SUB-D plug):
Service (X50) = for
●
Application (X51) = for connecting a printer or application
●
Two Ethernet (10BaseT) LAN connectors (8-pin RJ45 jacks) via LIMS:
LAN2 (not assigned)
●
LAN1 (administration via HiPath 3000/5000 Manager E and CTI
●
functions)
The LAN interface status is indicated by two LEDs:
LED1:
●
– Green = 100 Mbps online (link)
– Yellow = 10 Mbps online (link)
– Flashing = active
LED2 (green):
●
– On = full-duplex (FDX)
– Off = half-duplex
connecting the service PC
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch