Siemens HiPath 3000 Series Service Documentation page 378

boards.fm
Boards for HiPath 3000
Peripheral boards
Settings
Table 3-115 TCAS-2, TCASR-2 (for selected countries only) – Jumper Functions
Jumper
X11 Sets the V.24 baud rate
X12
X14
X13 Deletes the flash mem-
X16 Resetting the card
X17 Hardware watchdog
Table 3-116 TCAS-2, TCASR-2 (for selected countries only) – Jumper for Setting the V.24
Baud Rate
V.24 baud rate
(Kbps)
9.6
(default setting)
19.2
38.4
57.6
115.2
9.6
3-246
Function
Flash memory is deleted
ory (all sectors apart from U-
X11
Open
Open
Closed
Open
Closed
Setting
Pins 1–2 closed
See Table 3-116
boot (firmware)).
Reset performed.
Watchdog active.
(default setting)
Jumper
X12
Open
Open
Open
Closed
Closed
All other configurations
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Pins 2–3 closed
Flash memory is not de-
leted.
(default setting)
Reset not performed.
(default setting)
Watchdog not active.
X14
Open
Closed
Closed
Closed
Closed