Industry Canada Compliance; Ren; Equipment Attachment Limitations - Siemens HiPath 3000 Series Service Documentation

Table of Contents

Technical Specifications and Compliance to HiPath 3000

To select the carrier of choice for a call, the user dials the equal access code before dialing the

called party number. Equal access is also obtained by dialing the 800/888 or 950 number of

the carrier of choice.

Each Siemens Enterprise Communications GmbH & Co. KG system discussed in this section

is capable of providing user access to interstate providers of operator services through the use

of equal access codes. Modifications by aggregators to alter these capabilities are a violation

of the Telephone Operator Consumer Services Improvement Act of 1990 and Part 68 of the

Electrical Safety Advisory

Each Siemens Enterprise Communications GmbH & Co. KG system discussed in this section

is fully compliant with FCC Rules and Regulations. It is nevertheless recommended that an al-

ternating current (AC) surge arrestor of the form and capability suitable for the model pur-

chased be installed in the AC outlet to which the system is connected. Consult your sales part-

ner to determine the surge protector requirements for your system.

Industry Canada Compliance

The following paragraphs describe requirements for and present information based on the In-

dustry Canada standards.

The Ringer Equivalence Number (REN) defines how many devices can be connected to a tele-

phone line at the same time. The termination of an interface may consist of any combination of

devices subject only to the requirement that the sum of the RENs of all the devices does not

exceed five.

The Industry Canada label identifies certified equipment. This certification means that the

equipment meets certain telecommunications network protective, operational, and safety re-

quirements as described in the appropriate Terminal Equipment Technical Requirement docu-

ments. However, the Department offers no assurances that the devices will operate to the cus-

tomer's complete satisfaction at all times.

Before installing this equipment, users should ensure that it is permissible to be connected to

the facilities of the local telecommunications company. The equipment must also be installed

using an acceptable method of connection. The customer should be aware that compliance

with these conditions may not prevent degradation of performance in some situations.

Nur für den internen Gebrauch

A31003-H3590-S100-7-7620, 06/2012

HiPath 3000/5000 V9, Service documentation

Show Quick Links

Table of Contents