Connecting A Printer - Siemens HiPath 3000 Series Service Documentation

exup.fm
Expanding and Upgrading HiPath 3000
HiPath 3000Expanding
9.1.2

Connecting a Printer

Caution
7
Follow the safety and operating instructions provided by the printer manufacturer.
Introduction
You can use a printer as a CDR printer (serial data transmission) or as a call charge computer
output device (parallel data transmission).
Connecting a CDR printer
HiPath 3000
Backplane
X7 ("8-slot" cabinets)
GND 1
TXD 2
RXD 3
25-pin con- RTS 4
nector
CTS 5
DSR 6
DCD 8
DTR 20
GND 7
Figure 9-1 Sample Connection of a CDR Printer to HiPath 3000
Information on assigning V.24 interfaces from other systems is provided in the board descrip-
tions in Chapter 3.
9-4
Connection cables:
S30267-Z23-A100 = 10m
S30267-Z23-A500 = 50m
1) Frame ground
2) Signal ground
Nur für den internen Gebrauch
CDR printer
1)
1 GND
2 TXD
3 RXD
4 RTS
printer
5 CTS
25-pin connec-
tor
6 DSR
8 DCD
20 DTR
2)
7 GND
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation