Siemens HiPath 3000 Series Service Documentation page 616

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
Table 4-9 Visual inspection procedure
Step Activity
6. Check whether a separate
grounding is connected to
the main grounding termi-
nals of all system cabinets.
7. Check the local supply volt-
age.
8. Only for installing HiPath
3800 as a standalone sys-
tem:
close all system cabinets
with the front and back plas-
tic covers provided.
After finishing the visual inspection, you can begin starting up the HiPath 3800 as
>
described in Chapter 5.
4-84
Resources/
Remarks
If necessary, ground the system as
described in the following sections:
●
●
Digital multime-
ter
Fit the cover into the guides and press
down on the cover unit it snaps into
place.
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Action
Section 4.1.3.4, for installing the
standalone HiPath 3800
Section 4.1.4.4, for installing the
HiPath 3800 in the 19-inch cabi-
net.
A31003-H3590-S100-7-7620, 06/2012