Table of Contents
Advertisement
boards.fm
Boards for HiPath 3000
Peripheral boards
3.3.32
TMAMF (for selected countries only)
NOTE
>
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, "Lightning Protec-
tion".
Introduction
The TMAMF (Trunk Module Analog for MultiFrequency Code Signaling) board contains eight
trunks for analog direct inward dialing. The system supports MFC-R2 signaling (default set-
ting), MFC-R2 with caller ID, tone dialing, and dial pulsing. It is not possible to use DTMF and
MFC-R2 (with or without caller ID) simultaneously.
The board is implemented in HiPath 3550 and has the part number S30810-Q2587-A400.
Switches and LEDs
Figure 3-93
TMAMF (S30810-Q2587-Axxx)
3-270
LEDs
H0 (green)
H100 (yellow)
:
:
:
:
H7
On
0
Lockout switch S501
:
(factory default)
:
7
Subminiature D connector for
DSP diagnosis
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Hide quick links:
Advertisement
Table of Contents
