Siemens HiPath 3000 Series Service Documentation page 104

sysdat.fm
System Data
Dynamic Configuration Rules
Table 2-44 Points for Gateway Channels (When Using G.711 or G.729)
System
System
Gateway channels
with VPN and AES
(G.723 only)
Gateway channels
with VPN and 3DES
(G.723 only)
Voice Channels (LAN1 - LAN2)
The following table indicates the HG 1500 voice channel load (LAN1 ↔ LAN2) when voice
packets are routed via the HG 1500, e.g., for calls between IP phones in two different systems
networked via a VPN tunnel. The size of the HG 1500 load depends on the encryption algorithm
(AES or 3DES) and on the voice codec used (G.711, G.729, G.723).
Table 2-45 Points for Voice Channels (When Using G.711 or G.729)
System
System
Voice channels
without VPN
Voice channels
with VPN and AES
Voice channels
with VPN and 3DES
Voice channels
without VPN
(G.723 only)
Voice channels
with VPN and AES
(G.723 only)
Voice channels
with VPN and 3DES
(G.723 only)
2-64
Number of gateway channels (DSP ↔ LAN) if only the
voice codec G.723 and VPN with AES encryption are used.
Number of gateway channels (DSP ↔ LAN) if only the
voice codec G.723, VPN and 3DES are used.
Number of voice channels (LAN1 ↔ LAN2) if encryption is
not used.
Number of voice channels (LAN1 ↔ LAN2) if VPN and
AES encryption are used.
Number of voice channels (LAN1 ↔ LAN2) if VPN and
3DES encryption are used.
Number of voice channels (LAN1 ↔ LAN2) if only the voice
codec G.723 and no encryption is used.
Number of voice channels (LAN1 ↔ LAN2) if only the voice
codec G.723 and VPN with AES encryption is used.
Number of voice channels (LAN1 ↔ LAN2) if only the voice
codec G.723 and VPN with 3DES encryption is used.
Meaning
Meaning
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Weight
60
70
Weight
104
73
89
49
60
70