Siemens HiPath 3000 Series Service Documentation page 513

Nur für den internen Gebrauch
Installation location of the PFT1 and PFT4 board (MDFU/MDFU-E)
Wire PFT1 or PFT4 into the MDFU or MDFU-E. The boards require -48 V. For the assignments
of both boards, see Figure 3-144.
2 x PFT1
1 x PFT4
Figure 3-143 Installation Location of PFT1 and PFT4 (MDFU/MDFU-E) (not for U.S.)
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
or
System side
Boards for HiPath 3000
Line network
boards.fm
Options
3-381