Hipath 3000/5000 V9 , Service Documentation - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
– Only use grounded soldering irons.
Use only original accessories. Failure to observe these instructions may damage the
●
equipment or even violate safety and EMC regulations.
Before starting wall mounting, check that the wall has sufficient bearing strength. Always
●
use suitable installation and mounting materials to mount the communication systems and
devices securely.
Condensation damage:
●
A sudden temperature change may cause condensation to form. If the communication sys-
tem or device is, for example, moved from a cold environment to a warmer space, conden-
sation may form. Wait until the temperature has regulated and the communication system
or device is completely dry before switching it on.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Introduction and Important Notes
safety information and warnings
inform.fm
1-13