Siemens HiPath 3000 Series Service Documentation page 226

boards.fm
Boards for HiPath 3000
Peripheral boards
Signal Name
TMS
TDI
TDO
Table 3-36 SIPAC Connector Contact Assignment
Assigning the system cable S30267-Z167-Axxx
Table 3-37 DIUT2 - Assignment of System Cable S30267-Z167-Axxx
Pin
8
15
1
9
Power supply unit
The DIUT2 board receives +5 V (±5%) supply voltage via the backplane. Voltage of +1.5 V and
+3.3 V is created by onboard controllers.
3-94
Connector contact
X7-46
X7-48
X7-50
Function
a-wire (T), transmit
b-wire (R), transmit
a-wire (T), receive
b-wire (R), receive
Signal description
Boundary scan: check mode
selection
Boundary scan: Check data
input
Boundary scan: Check data
output
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Direction
Not connected
Not connected
Not connected
Color code
ora/wht
wht/ora
blu/wht
wht/blu