Toro GreensPro 1240 Service Manual page 163

Installing the Steering Column (continued)
GreensPro ™ 1240/1260
14211SL Rev A
C. Gently pull the steering column boot over the tilt control lever.
D. Set the steering column tilt to the fully forward position.
E. Pull the front of the boot down over the base of the steering column.
6. Install the bearing cover over the top of the steering column.
7. Install the steering wheel; refer to Installing the Steering Wheel (page
Page 7–37
7–33).
Chassis: Service and Repairs