Siemens SINAMICS S120 Commissioning Manual page 112
With startdrive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Commissioning
4.4 Creating a project offline in Startdrive
Setting the drive object type in the project information
1. If the device configuration is not active in your Startdrive project, call it via the project tree.
2. Select the desired drive axis in the device configuration.
3. Open the Inspector window if it has still not been opened or displayed.
4. In the secondary navigation of the Inspector window, select "General".
Figure 4-28
5. Select the desired type from the "Drive object type" drop-down list (generally "VECTOR"
because "SERVO" is set per default via the Motor Module).
A confirmation prompt appears as to whether you really want to change the drive object
type.
6. Click "Yes" to confirm the prompt.
The desired drive object type is set.
7. Save the changes in the project.
112
Changing the drive object type; Motor Module example
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Advertisement
Table of Contents
