Inserting The Drive Unit - Siemens SINAMICS S120 Commissioning Manual

4.4.3

Inserting the drive unit

Requirement
You have created a project (Page 82) or have opened an existing project.
Inserting a drive unit via the project view
Proceed as follows to insert new drive units in the project view:
1. Double-click "Add new device" in the project navigation.
The dialog with the same name opens.
2. Click "Drives" to display the drives available.
3. Select the desired S120 drive unit in the list.
Figure 4-5
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Dialog: Adding a new drive unit
4.4 Creating a project offline in Startdrive
Commissioning
87