3.3.2
Interconnect BICO inputs
Use a connection dialog to connect binector or connector inputs.
Connecting a signal
To make a connection, proceed as follows:
1. Click the binector or connector icon of the signal that you want to connect (
A connection dialog for the selection of the possible parameters opens. The drive object
for which you want to make a connection is displayed automatically in the "Drive object"
drop-down list on the right.
Figure 3-2
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
BICO dialog input
Fundamentals
3.3 BICO interconnections
or
).
65