Integrating The Hcs4200 Components Into The Profibus Configuration - Siemens SIPLUS HCS Series Operating Instructions Manual

Configuration

8.2 Integrating the HCS4200 components into the PROFIBUS configuration

8.2 Integrating the HCS4200 components into the PROFIBUS
configuration
Procedure with SIMATIC S7
If the hardware catalog of your configuration software does not feature the HCS4200 yet, it
can be integrated by installing the GSD file. This is available in the following language
versions: German (SIEM81C4.gsg) and English (SIEM81C4.gse) and can be downloaded
from the
Service&Support area (http://www.siemens.com/automation/service&support).
Procedure with non-Siemens controllers
You will need the language-specific GSD file for PROFIBUS configuration. The
SIEM81C4.gsx files can be downloaded from the Siemens Service&Support area
(http://www.siemens.com/automation/service&support).
If a non-Siemens PROFIBUS controller is used, install the GSD file as described in the
manufacturer's instructions.
104
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006