Technical Specifications Of Expansion Module Em4315 (For Combined Mode Only) - Siemens SIPLUS HCS Series Operating Instructions Manual

13.7 Technical specifications of expansion module EM4315 (for
combined mode only)
Article number
General information
Product type designation
Installation type/mounting
Mounting type
Mounting position
Type of ventilation
Supply voltage
Type of supply voltage
Rated value (DC)
Relative negative tolerance
Relative positive tolerance
Connection method
Design of electrical connection for supply
•
voltage
– Connectable conductor cross-sections,
solid
– Connectable conductor cross-sections,
finely stranded with wire end pro-
cessing
– Connectable conductor cross-sections
for AWG cables
Power
Active power input
Hardware configuration
Type of power output connectable
Slots
Number of slots
•
Interfaces
Interfaces/bus type
Protocols
Supports protocol for PROFINET IO
PROFIBUS DP
Further protocols
EtherNet/IP
•
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006

13.7 Technical specifications of expansion module EM4315 (for combined mode only)

6BK1943-1AA50-0AA0
EM4315
Screw mounting to POM
vertical
Forced ventilation
DC
24 V
20 %
20 %
Connector 2x 2-pin with tension spring connec-
tion
1x (0.2 ... 2.5 mm²)
1x (0.2 ... 2.5 mm²)
1x (26 ... 12)
1 W
POM4320
0
system interface
No
No
No
Technical specifications
247