Siemens SIPLUS HCS Series Operating Instructions Manual page 22

System overview
3.2 Features
Features
● Modular central configuration
● Communication over PROFINET or PROFIBUS (CIM4210C only PROFINET)
● Parameter assignment, commissioning, visualization and diagnostics via
SIEMENS TIA Portal
● Integrated diagnostic and monitoring functions
● Diagnostics, analysis and configuration of PROFINET networks with PRONETA
● Control modes:
– POM4220 Lowend: Half-wave control
– POM4220 Midrange phase angle control and POM4220 Highend:
– POM4220 Flexible: Half-wave control
● Connection of incoming supply through 3-pole connector on the front of the POM
● Connection of power outputs via two connectors on the front of the POM
● Only a 24 V supply is needed for up to 12 POMs (with one rack) or 24 POMs
(when using a double rack).
● Slot for an I/O module (not with CIM4210C PROFINET).
A detailed list of the functions for the different POM versions is available in section Overview
of functions (Page 131).
20
Half-wave control, Softstart and phase control
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006