Security Information; Safety Information - Siemens SIPLUS HCS Series Operating Instructions Manual

Security information

2.1

Safety information

This device corresponds to the approvals printed on the type plate. If you have questions
about whether it is permissible to install the device in the planned environment, please
contact your service representative.
NOTICE
Alterations to the devices are not permitted.
Failure to observe these guidelines shall constitute a revocation of the approvals and
manufacturer's warranty.
Warning symbols on the device
Electric shock hazard
May cause death or serious injury
When this warning symbol
instructions for the device. The operating instructions contain information about the
potential risks and enable you to recognize risks and implement countermeasures.
Note before connecting the device
Electric shock hazard
May cause death or serious injury
The supply system to which the heating control system is connected must have a circuit
breaker. The device must be switched off and secured against switching on again, before
connecting to the line voltage. Otherwise, there is a risk of electric shock.
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006
WARNING
WARNING
appears on the device, you must consult the operating
2
13