Mounting And Dismantling Cim4210C Profinet - Siemens SIPLUS HCS Series Operating Instructions Manual

Installation/mounting

5.7 Mounting and dismantling CIM4210C PROFINET

5.7 Mounting and dismantling CIM4210C PROFINET
Mounting CIM4210C PROFINET
Figure 5-8
1
2
3
4
Dismantling CIM4210C PROFINET
1
2
60
Installing CIM4210C
Drill 4 threaded holes M6 in the mounting plate
The threaded holes are shown in the section "HCS4200 components (Page 250)".
①
Screw 4 screws M6 in the mounting plate
③
Insert the device in the control cabinet.
②
Fasten the device .
①
Loosen the 4 screws .
③
Remove the device from the control cabinet.
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006