Huawei FusionModule1000A20 Installation Manual page 27

Prefabricated all-in-one data center

Hide thumbs Also See for FusionModule1000A20:

Table of Contents

FusionModule1000A20 Prefabricated All-in-One Data

Center

Installation Guide

Figure 4-7 Base installation scenario diagram (unit: mm)

(1) Pre-fab. module base

Step 2 Determine the installation position for the first base in the installation area based on the site

space, and draw longitude and latitude reference lines between the first base and other bases.



Lines should be perpendicular or parallel, with an angle of 90 degrees at cross points.



The point where the reference lines intersect is the middle point for installing a pre-fab.

module base.

Step 3 Place bases based on the reference lines.

Issue 02 (2020-01-15)

(2) Concrete platform

4 Installing Pre-fab. Modules

(3) Ground

Table of Contents