Huawei FusionModule1000A20 Installation Manual page 65

FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
4.
Step 2 Attach the 4G antenna to the top of the cable feeder window on the pre-fab. module.

After routing the 4G antenna cable into the pre-fab. module through its ELV feeder
window (No. 8), seal the port in the feeder window using sealing putty.

The cable outside the pre-fab. module needs to be fit with a corrugated metal hose. For
details, see

The cable outside the pre-fab. module can be bent only in the U-shape.
Figure 6-26 Installing the 4G antenna
Step 3 Attach the RF_Z antenna on the top of the monitoring box.
Issue 02 (2020-01-15)
Figure 6-25 Installing the Micro SD and SIM card
Reinstall the ECC800 main control module in the ECC800 subrack.
A.1 Cable Installation
Copyright © Huawei Technologies Co., Ltd.
6 Installing Devices Inside the Pre-fab. Module
Techniques.
59