Installing Waterproof Metal Connectors - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
Figure A-9 Applying sealant
Step 9 Spray water to test the waterproof performance of the DPJ end connector.
----End
A.1.6.2 Installing Waterproof Metal Connectors
Prerequisites



Preparations
Tool: wrench dedicated for the feeder window
Materials: transparent sealant, sealing rubber strip
Documents: none
Skill requirement: skilled technician
Procedure
Step 1 Disassemble a waterproof metal connector using the dedicated feeder window wrench shipped
with the pre-fab. module, and take the plug out of the connector, as shown in
Issue 02 (2020-01-15)
Do not operate a feeder window outdoors under bad weather conditions if no shelter is
available.
Cables have been mounted on cable trays.
Cables need to be routed into a feeder window using waterproof metal connectors.
Copyright © Huawei Technologies Co., Ltd.
A A Basic Installation Operations
Figure A-10.
91