Mounting; Technical Data - Siemens SINAMICS S120 Combi Equipment Manual

Accessories
11.2 DRIVE-CLiQ coupling
11.2.5

Mounting

①
Figure 11-9
Installation
1. Attach the DRIVE-CLiQ coupling to the mounting surface as shown in the drilling pattern.
2. Remove the protective caps of the DRIVE-CLiQ coupling.
3. Latch the DRIVE-CLiQ connectors at both sides of the DRIVE-CLiQ coupling.
11.2.6

Technical data

Table 11- 2
DRIVE-CLiQ coupling 6SL3066-
2DA00-0AB0
Weight
Degree of protection
286
Contact surface
Hole drilling pattern for installation
Technical data
Unit
kg
IP67 according to IEC 60529
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
0.272
SINAMICS S120 Combi