Technical Data; Drive-Cliq Hub Module External Dme20; Description - Siemens SINAMICS S120 Combi Equipment Manual

9.2.6

Technical data

Table 9- 19
6SL3055-0AA00-6AA1
Electronics power supply
Voltage
Current (without DRIVE-CLiQ node)
Maximum cable length
PE/ground connection
Weight
9.3

DRIVE-CLiQ Hub Module External DME20

9.3.1

Description

The DRIVE-CLiQ Hub Module External DME20, just like the DRIVE-CLiQ Hub Module
DMC20, is only used to connect direct measuring systems for the feed axes and expansion
axes of the S120 Combi.
The component has degree of protection IP67.
Note
The DME20 should also be used if only one feed axis is coupled with a direct measuring
system.
A fixed topology applies when assigning the particular feed axis to a DRIVE-CLiQ interface
(see Section Topology rules for DRIVE-CLiQ (Page 131)) and this must be observed.
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Technical data of the DMC20
Additional system components
9.3 DRIVE-CLiQ Hub Module External DME20
Unit
V
DC
A
DC
m
At the housing with M4 screw
kg
Value
24 V DC (20.4 ... 28.8)
0.15
30
0.36
229