Disabling Button Operations - Panasonic Live Production Suite Series Operating Manual

Disabling button operations

For each button or block, the operation can be disabled.
1
Select the <PANEL> button → [BUTTON INHIBIT] → [Panel1]/[Panel2]/[Panel3] tab.
[Panel1] tab
[Panel2] tab
[Panel3] tab
2
Select the buttons/blocks to be disabled from the button/block list in the left column.
f Select [Button Group] to filter the button/block list in the left column.
3
Set the range of disabled operations.
f Use [Group Select] and [Bus Select] to set the range of disabled operations.
For details, refer to "Target button/block for [Button Group]/[Group Select]/[Bus Select] operations".
4
Select an item in [Inhibit].
[Off]
[On]
5
Select [Set].
r Target button/block for [Button Group]/[Group Select]/[Bus Select] operations
Item
[Button Group]
[Group Select]
[Bus Select]
Chapter 7 Configuring Operations — Disabling button operations
Assigns the control panel 1.
Assigns the control panel 2 (second Control Panel).
Assigns the control panel 3 (third Control Panel).
Enables the operation.
Disables the operation.
Filters the button/block list in the left column.
[XPT-Page1]: First page of the crosspoint buttons
[XPT-Page2]: Second page of the crosspoint buttons
[XPT-Page3]: Third page of the crosspoint buttons
[XPT-Page4]: Fourth page of the crosspoint buttons
[Other]: <2nd PAGE>/<3rd PAGE> buttons, <AUX 1/2> to <AUX 15/16> buttons
[Block]: ME1 block, ME2 block, DSK operation area, positioner area, AUX area
Sets the group range for disabled operations.
r When the first to fourth pages of the crosspoint buttons are selected in the left column:
[All+AUX]: All buses including the AUX bus
[All]: All buses excluding the AUX bus
[ME1]: The ME1 bus
[ME2]: The ME2 bus
r When the <IMAG> button, <2nd PAGE>/<3rd PAGE> buttons are selected in the left column:
[All+AUX], [All]: All
[ME1]: Buttons in the ME1 block
[ME2]: Buttons in the ME2 block
Sets details of [Group Select] when the first to fourth pages of the crosspoint buttons are selected in the left column.
[All]: All in the [Group Select] setting range
[A/B]: The A bus, B bus in the [Group Select] setting range
[Key]: KEY1, KEY2 in the [Group Select] setting range (DSK is included when [All] is selected with [Group Select])
Description
– 114 –