Panasonic Live Production Suite Series Operating Manual page 92

Press and hold: It will perform the following operations depending on the setting of the <MEM> button → [KEY PRESET] → [Register] tab → [Long
Push] column.
f [Store]: The current key setting is registered to the applicable button. (Store)
f [Delete]: The setting of the key registered to the applicable button is deleted. (Delete)
f [Disable]: No operation is performed even with a long push.
r Button display
Low tally: The button recalled last time or registered last time
Preset tally: Button to which a key setting is registered
Key preset playback target settings
Details of the playback target (XPT, Effect, Trans) can be selected. This setting is common to all keys.
1
Select the <MEM> button → [KEY PRESET] → [Register] tab.
2
Select [ON]/[OFF] in [XPT]/[Key Effect]/[Key Trans] in the [Recall Sel] column.
The items played when all settings are [ON] are as follows:
[XPT]
[Key Effect]
[Key Trans]
Chapter 5 Basic Operations — Memory
Plays the source selection status in the key fill bus and key source bus when [ON] is set.
Plays the following key decoration settings when [ON] is set.
f All settings of the <ME1>/<ME2> button on the top menu → [KEY1], [KEY2] → [Key Setting]/[Resizer] tab
f All settings of the <DSK> button on the top menu → [DSK1], [DSK2] → [Setting] tab
f Settings of the <ME1>/<ME2> button on the top menu → [KEY1], [KEY2] → [Chroma] tab → [Adjust] column, [Phase
Adjust] setting in the R menu
f Settings that disable the chroma key
Plays key transition settings when [ON] is set.
f All settings of the <ME1>/<ME2> button on the top menu → [KEY1], [KEY2] → [Transition]/[Modify] tab
f All settings of the <DSK> button on the top menu → [DSK1], [DSK2] → [Transition] tab
– 92 –