Panasonic Live Production Suite Series Operating Manual page 27

r Transition status display
The transition status display at the left side of the fader lever indicates not the lever position but the amount of transition, and also works during auto
transition.
During pattern limitation, the amount of limitation will also be displayed. (Fig. 1)
If the fader lever position and the amount of images do not match after memory playback or auto transition execution, every other display will be
displayed. When displayed at one side (Fig. 2, Fig. 3), push the lever towards the displayed side to make the lever position recognize.
If multiple operations of BKGD and KEY1 to KEY4 are performed in the next transition, both sides may become unmatched. In such a case, the display
will be like Fig. 4, so move the fader lever back and forth to make the lever position recognize.
KEY/DSK operation areas
1 Operation target selection buttons (<KEY1>/<KEY2>/<KEY3>/<KEY4>/<DSK1>/<DSK2>/<DSK3>/<DSK4>)
Selects the operation target for key/DSK preset memory.
The <DSK3> and <DSK4> buttons cannot be used with the Live Production Suite.
2 Key/DSK preset memory buttons (<1>/<2>/<3>/<4>)
Recalls/stores the key preset memory. (page 91)
f Short press: Recalls data saved to the corresponding button. (Recall)
f Long press: Stores the current key settings to the corresponding button. (Store)
Current key setting can be deleted (Delete) by press and holding. For details, refer to "Key preset".
3 <KEY1 ON>/<KEY2 ON>/<KEY3 ON>/<KEY4 ON>/<DSK1 ON>/<DSK2 ON>/<DSK3 ON>/<DSK4 ON> buttons
Executes/cancels each key with a cut transition.
The <DSK3 ON> and <DSK4 ON> buttons cannot be used with the Live Production Suite.
4 Source name display panels
Displays the source name selected for each key.
5 <KEY1 TRNS>/<KEY2 TRNS>/<KEY3 TRNS>/<KEY4 TRNS>/<DSK1 TRNS>/<DSK2 TRNS>/<DSK3 TRNS>/<DSK4 TRNS> buttons
Executes transition with the transition type and transition time for each key set in the menu. (pages 60, 71)
The <DSK3 TRNS> and <DSK4 TRNS> buttons cannot be used with the Live Production Suite.
Positioner area
1 Memory card access LED
Lights up while accessing the memory card.
Do not turn off the power of the unit or eject the memory card while lit. The memory card or data in the memory card may be damaged.
2 Memory card slot
Insert an SD memory card (optional) or an SDHC memory card (optional).
3 Positioner buttons (<X>/<Y>)
Chapter 3 Part Names and Functions — Control Panel AV-HS60C2/AV-HS60C4
Fig. 1
1
2
3
4
CG5V CG6V
5
KEY operation area
1
2
3
Fig. 2 Fig. 3
CG1V CG2V CG3V CG4V
CAM1 CAM2
DSK operation area
4
5
6
7
– 27 –
Fig. 4
1
2
3
4
5