Rear Panel - Panasonic Live Production Suite Series Operating Manual

Display position
Upper left
Upper right
Bottom
2 <WFM VECT> button
Each time the button is pressed when the menu display is split, the WFM (waveform monitor) and VECTOR (vectorscope) displayed at the upper
right of the screen are switched.
@ NOTE
t When anything other than [DISP] is selected using the <SYS> button → [SYSTEM] → [Display] tab → [Video Codec] column → [Target] item, the
image selected in the DISP bus, the WFM, or the VECTOR is not displayed.
t Image, WFM, and VECTOR are not displayed in the Menu Panel AV-HS60C3 connected to the control panel 2/3.

Rear panel

1 <CONTROL PANEL> terminal (connector: DVI-D/signal: independent signal)
Connects the Control Panel AV-HS60C2/AV-HS60C4.
f This is the dedicated interface for connection with the Control Panel AV-HS60C2/AV-HS60C4 (optional). Do not connect with DVI output devices.
Chapter 3 Part Names and Functions — Menu Panel AV-HS60C3
Images selected in the DISP bus are displayed.
The WFM (waveform monitor) or VECTOR (vectorscope) for the video selected in the DISP bus is displayed.
The menu will be displayed.
Display content
– 32 –
1