Table of Contents
Advertisement
3
Select [Border] in the R menu, and set [Width] and [Soft] in the encoder menu.
[Width]
[Soft]
NOTE
@
t When [Border] in the [Border] column is set to [ON], the amount of soft effect set using [Soft] in the [Border] column is indicated as the ratio of soft
effect to the border width. To add only soft effect to a wipe, set [Border] in the [Border] column to [OFF].
t The wipe pattern screen is displayed when you select an item displayed with a transition pattern icon displayed by selecting top menu <ME1>/<ME2>
button → [BKGD] → [Transition] tab → [WIPE Patt] column.
t When the following waveforms are selected, a border is not applied even if [Border] in the [Border] column is set to [ON].
- SQ: 47, 48, 49, 50
Setting the border color
When [Matte] is selected in [Border Fill] in the [Border] column, you can set the color of the border.
1
Select the <ME1>/<ME2> button → [BKGD] → [Border/Trim] tab.
2
Adjust the color.
f Select [Border Matte] in the R menu and adjust the color in the color palette screen.
Modifying wipe
1
Select the <ME1>/<ME2> button → [BKGD] → [Transition] tab.
2
Select the items in [N/R] in the [Direction] column.
f This setting is linked with the <N/R> button.
[ON]
[OFF]
3
Select the items in [Direction] in the [Direction] column.
f This setting is linked with the <N>/<R> button.
[Normal]
[Reverse]
4
Select an item in [Pattern Limit].
f This setting is linked with the <PATT LIMIT> button.
[OFF]
[ON]
5
Select [Patt Limit] in the R menu, and display the encoder menu.
6
Set [Size] in the encoder menu.
f Set the size restriction on the amount of transition.
7
Set [Return Time] in the encoder menu.
f Set the transition time to the position of the fader lever when [Pattern Limit] is set to [OFF] from [ON].
8
Select the <ME1>/<ME2> button → [BKGD] → [Pos/Modify] tab.
9
Select [Pos/Size] in the R menu, and set [X] and [Y] in the encoder menu.
f Set the start position of the next pattern waveforms.
- WIPE: 11, 12, 13, 14, 15
Chapter 5 Basic Operations — Wipe
Sets the border width.
Sets the amount of soft effect.
[100]
[50]
[0]
[Y-Pos]
[−50]
[−50]
[−100]
[−100]
When the transition is complete, the normal direction and reverse direction swap with each other.
When the transition is complete, the normal direction and reverse direction do not swap with each other.
Wiping proceeds in the normal direction.
Wiping proceeds in the reverse direction.
Does not restrict the amount of wipe transition for background transition. If the setting is changed from [ON] to [OFF],
transition is made according to the position of the fader lever at the time specified in [Return Time].
Restricts the amount of wipe transition for background transition.
f The amount of transition for mixed transitions is also limited by selecting top menu <OPR> button → [OTHER
SETTINGS] → [Transition] tab → [Pattern Limit] column → [Mix Enable], and setting it to [ON].
[50]
[0]
[100]
[X-Pos]
– 54 –
Inside the screen
Outside the screen
Advertisement
Table of Contents
