Table of Contents
Advertisement
3
Select [Page Turn] in the R menu, and set [Size], [Radius], and [Angle] in the encoder menu.
[Size]
[Radius]
[Angle]
Ripple effect settings
Set the following pattern waveforms.
f 3D: 109
The set ripple amount is implemented when the transition amount reaches 50%, then the transition continues while the MIX composition is performed.
f 3D: 110
The set ripple amount is implemented on the border parts of the circular wipe.
1
Select the <ME1>/<ME2> button → [BKGD] → [Pos/Modify] tab.
2
Select the item in [Light].
[OFF]
[ON]
f This setting is also applied to the following pattern waveforms.
- 3D: 99, 100, 101, 102
3
Select [Ripple] in the R menu, and set [Amplitude], [Frequency], and [Speed] in the encoder menu.
[Amplitude]
[Frequency]
[Speed]
Setting spin effects
A spin effect can be added during the background transition.
1
Select the <ME1>/<ME2> button → [BKGD] → [Pos/Modify] tab.
2
Select the items in the [Spin Mode] column.
[Off]
[Trans Spin]
[Auto Spin]*
[Manual Spin]*
* It may become discontinuous at the edge of transition in the [Auto Spin] or [Manual Spin] modes.
3
Select [Spin] in the R menu, and set [X-Spin], [Y-Spin], and [Z-Spin] in the encoder menu.
f This sets the amount of rotation of the spin effect during background transition.
f An effect can be added to the following pattern waveforms.
- [Z-Spin]
WIPE: 1 - 15, 17
SQ: 42 - 45
- [X-Spin], [Y-Spin], [Z-Spin]
SQ: 41, 51 - 54
Setting the Multi Pattern effect
The wipe pattern can be divided to the specified number.
f Enabled when the following pattern waveform is selected.
- WIPE
1
Select the <ME1>/<ME2> button → [BKGD] → [Modify] tab.
2
Set the specification method of the number of division in [H/V Sync] of the [Multi] column.
[ON]
[OFF]
3
Set the number of division in horizontal and vertical direction in [H] and [V] of the [Multi] column.
Setting the Modulation effect
An effect to ripple the wipe edge can be added.
f Enabled when the following pattern waveforms are selected.
- WIPE: Except 24 (Free Wipe)
Chapter 5 Basic Operations — Wipe
Set the size when reduced.
Set the radius for the Page Turn effect.
Set the angle for the Page Turn effect.
A lighting effect is not added.
A lighting effect is added.
Set the wave amplitude.
Set the wave frequency.
Set the speed that the wave moves.
Does not spin regardless of setting value of [X-Spin], [Y-Spin], and [Z-Spin].
Spins in specified amount of spin depending on the transition.
Spins in speed in accordance with specified amount of spin regardless of the transition.
Tilts in specified amount of spin regardless of the transition.
Makes the number of division the same in horizontal and vertical directions.
Different number of division can be specified for horizontal and vertical directions.
– 56 –
Advertisement
Table of Contents
